Pic Software Page

Last 06-03-2016


Warning : It is on your own responsibility if you build any of these constructions and they do any harm to persons or your equipment.

This Software, for the Marklin Delta compatible Decoder, was originally Written By Bo Braendstrup, but have been rewritten a lot by us both , to fit the Hardware. I think you should visit his Home Page, and see what else he had made.
  • Bo Braendstrup's Home Page

    • Decoder version 1 Software


    Use this file Decoder1.hex to program the Pic. [image] (20-2-1999)

    HIGHLIGTS: The Decoder has 2 outputs for light and 4 function output for additional purposes such as smoke generator,sound and Telex. 1 function is the old forward function and F1, The 2 function are the old rewerse function and F2, the last to is F3 and F4. The decoder is "ontrack" Program able (while running). Decoder Address , can be "ontrack" programmed. Delays in the speed functions like Marklin's, can be "ontrack" programmed. The speed curve can be "ontrack" programmed. Light behavior can be "ontrack" programmed. F4 behavior can be "ontrack" programmed.(if it controls F4 output or switches Delay on/off)

    The decoder has preprogrammed Delays in the speed functions like Marklin's (delayed speed up and delayed slow down). And additional 128 internal speed steps, that's an improvement from the known 15.


    As a new thing the address circuit on the decoder has been disabled, since is is "ontrack" address able, but they have not to be removed.

    KNOWN ERRORS: The Last test showed no errors.

    [image]Decoder version 2/3/ Software[image]


    Use this file Dec-5e-16f628.hex to program the Pic 16F628. [image] (06-03-2016)

    HIGHLIGTS: The Decoder has 2 outputs for light and 4 function
    output for additional purposes such as smoke generator,sound and Telex.
    1 function is the old forward function and F1, The 2 function are the old rewerse function and F2, the last two is F3 and F4.
    The decoder is "ontrack" Program able (while running).
    Decoder Address , can be "ontrack" programmed.
    Delays in the speed functions like Marklin's, can be "ontrack" programmed.
    The speed curve can be "ontrack" programmed.
    Light behavior can be "ontrack" programmed.
    Automatic Smoke controll, speed dependent.
    F3 behavior can be "ontrack" programmed.(if it controls F3 output or switches Smoke on/off)
    F4 behavior can be "ontrack" programmed.(if it controls F4 output or switches Delay on/off)
    Pic lifetime changed from about 5 year to 50-100 year, but a change in components is needed.

    NEW !!!! Now it can be ontrack programmed with Marklin Mobile Station.


    Be aware , if you are programming it with at Marklin mobile station, that it is the only train on the track, or else they get the same address!!.



    [image]Decoder version 5 Software[image]


    Use this file Dec-5F-12F629-tog_lille_print.hex to program the Pic 16F628. [image] (06-03-2016)

    HIGHLIGTS: The Decoder has 1 outputs for light.
    The decoder is "ontrack" Program able (while running).
    Decoder Address , can be "ontrack" programmed.
    Delays in the speed functions like Marklin's, can be "ontrack" programmed.
    The speed curve can be "ontrack" programmed.
    Light behavior can be "ontrack" programmed.
    F4 behavior can be "ontrack" programmed.(if it controls F4 output or switches Delay on/off)

    NEW !!!! Now it can be ontrack programmed with Marklin Mobile Station.


    Be aware , if you are programming it with at Marklin mobile station, that it is the only train on the track, or else they get the same address!!.



    [image]Decoder version 6 Software[image]


    Use this file Dec-6F-12F629-tog_stort_print.hex to program the Pic 16F628. [image] (06-03-2016)

    HIGHLIGTS: The Decoder has 2 outputs for light.
    The decoder is "ontrack" Program able (while running).
    Decoder Address , can be "ontrack" programmed.
    Delays in the speed functions like Marklin's, can be "ontrack" programmed.
    The speed curve can be "ontrack" programmed.
    Light behavior can be "ontrack" programmed.
    F4 behavior can be "ontrack" programmed.(if it controls F4 output or switches Delay on/off)

    NEW !!!! Now it can be ontrack programmed with Marklin Mobile Station.


    Be aware , if you are programming it with at Marklin mobile station, that it is the only train on the track, or else they get the same address!!.



    [image]Decoder version 7 Software[image]


    Use this file Dec-7F-12F629-tog-telex.hex to program the Pic 16F628. [image] (06-03-2016)

    HIGHLIGTS: The Decoder has 2 outputs for light and 1 function (F1)
    output for additional purposes such as smoke generator,sound and Telex.
    The decoder is "ontrack" Program able (while running).
    Decoder Address , can be "ontrack" programmed.
    Delays in the speed functions like Marklin's, can be "ontrack" programmed.
    The speed curve can be "ontrack" programmed.
    Light behavior can be "ontrack" programmed.
    F4 behavior can be "ontrack" programmed.(if it controls F4 output or switches Delay on/off)

    NEW !!!! Now it can be ontrack programmed with Marklin Mobile Station.


    Be aware , if you are programming it with at Marklin mobile station, that it is the only train on the track, or else they get the same address!!.



    [image]Wagon Decoder Software[image]


    Use this file Dec-8c-12F629-VOGN.hex to program the Pic 12F629. [image] (06-03-2016)

    HIGHLIGTS: The Decoder has 2 outputs for light and 1 function (F1)
    output for additional purposes such as cabin light.
    The decoder is "ontrack" Program able (while running).
    Decoder Address , can be "ontrack" programmed.
    Light behavior can be "ontrack" programmed.

    NEW !!!! Now it can be ontrack programmed with Marklin Mobile Station.


    Be aware , if you are programming it with at Marklin mobile station, that it is the only train on the track, or else they get the same address!!.



    Master controller version 2 Software


    Use this file Encoderi.hex to program the Pic 16F84-04. (22-03-2000)

    Use this file Encoderi_628.hex to program the Pic 16F628. (05-03-2003)

    HIGHLIGTS: The Master controller can controll up to 100 trains at the same time, and up to 20 Master controllers can be connected to each other at the same time. The master controller can control the Old func + F1 to F4, it have a keypad to controlle the adress on the trains + func + reverse + F1 to F4.

    KNOWN ERRORS: Only adress 0-63 are saved for the time beeing, We are working on it.

    Master controller version 3 Software

    Use this file Encodkb2.hex to program the Pic 16F84-04. (22-03-2000)

    HIGHLIGHTS: Same as Master controller ver 2, but with 28 speed step control.
    KNOWN ERRORS: Only adress 0-63 are saved for the time beeing, We are working on it.

    Master controller version 4 Software

    Use this file master4r.hex to program the Pic 16F84-04. (02-04-2003)

    Use this file mas4r628.hex to program the Pic 16F628-04. (02-04-2003)

    Use this file 24lc16.hex to program the Prom 24LC16. (17-10-2001)

    HIGHLIGHTS: Working on the details !!!.

    KNOWN ERRORS: None for the time beeing.

    Turnout / Signal controller version 1 Software


    Use this file keyboard5.hex to program the Pic 16F84-04. (05-03-2003)

    Use this file keyb5_628.hex to program the Pic 16F628. (05-03-2003)

    HIGHLIGTS: The Keyboard controller can controll up to 16 Turnout's or 32 Signals at the same time, and up to 20 Turnout/signal controllers can be connected to each other at the same time.

    KNOWN ERRORS: None for the time beeing
    Back to main page
    If you have any problems or questions regarding my constructions, please feel free to send me an mail.
    © 1998-1999-2000-2001-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016
    Frankie Frederiksson frankie@frederiksson.dk